Agilent Technologies 16700 SERIES LOGIC ANALYSIS SYSTEM 16700 Guida di Installazione Scaricare il pdf (Pagina 79)

Chapter 4: Installing Oscilloscope Measurement Modules

16533/34A Oscilloscope Module (single or multi-card modules)

3 Select the Run icon and the instrument will remind you to connect the

cables. Select OK and wait for the trigger skew calibration to complete.

As trigger skew calibration runs, messages appear in the message box on

screen. When the Ext Trig Skew calibration is complete, the resulting

calibration factors are stored in non-volatile RAM.

4 If a multi-card module is being calibrated, repeat the procedures

beginning with Step 1 on page 72 for each card until all cards have been

calibrated.

5 If all cards have been calibrated, remove the BNC cables from the

instrument.

6 Select Close in the Calibration window.

RUN

1 2 ... 74 75 76 77 78 79 80 81 82 83 84 ... 149 150

Nessun commento

Agilent Technologies 16700 SERIES LOGIC ANALYSIS SYSTEM 16700 Guida di Installazione Pagina 79