12
Standard Standard Option 1E6
2
> 3.2 GHz 500 MHz to 3.2 GHz 10 MHz to 3.2 GHz
On/off ratio 80 dB 80 dB (typical) 80 dB
Rise/fall times (Tr, Tf ) 10 ns (6 ns typical) 100 ns (typical) 10 ns (8 ns typical)
Pulse width
Internally leveled ≥ 1µs ≥ 2 µs (typical) ≥ 1µs
Level hold (ALC Off ≥ 20 ns (typical) ≥ 0.5 µs (typical) ≥ 20 ns (typical)
with power search)
3
Repetition frequency
Internally leveled 10 Hz to 500 kHz 10 Hz to 250 kHz 10 Hz to 500 kHz
(typical) (typical) (typical)
Level hold (ALC Off with dc to 10 MHz dc to 1 MHz (typical) dc to 10 MHz (typical)
power search)
3
(typical)
Level accuracy (relative to CW)
Internally leveled ±0.5 dB ± 0.5 dB ± 0.5 dB
±0.15 (typical)
Level hold (ALC Off with ≤ 20 GHz ±0.8 dB ±0.5 dB (typical) ± 1.2 dB (typical)
power search)
3
(typical)
Width compression ±5 ns (typical) ±50 ns (typical) ±5 ns (typical)
Video feed-through
4
< 2 mV (typical) < 200 mV (typical) < 125 mV (typical)
Video delay
(Ext input to Video) 40 ns (nominal) 40 ns (nominal) 40 ns (nominal)
RF delay (Tm)
(Video to RF output) 35 ns (nominal) 280 ns (nominal) 45 ns (nominal)
Pulse overshoot (Vor) < 10% (typical) < 10% (typical) < 10% (typical)
Input level +1 V
peak
= RF On +1 V
peak
= RF On +1 V
peak
= RF On
Input impedance 50 Ω, (nominal) 50 Ω, (nominal) 50 Ω, (nominal)
Pulse modulation
1
1. With ALC off, specs apply after the execution of power search. Specs apply with Atten Hold off (default
mode), or ALC level between 0 and +10 dBm.
2. Option 1E6 provides narrow pulse (20 ns typical) capability between 10 MHz and 3.2 GHz. Narrow pulse
capability above 3.2 GHz is standard.
3. Power search is a calibration routine that improves level accuracy in ALC-off mode. Un-pulsed RF power
will be present typically up to 50 ms when executing power search.
4. With attenuator in 0 dB position. Video feed-through decreases with attenuator setting.
Commenti su questo manuale