Agilent-technologies Wireless Network Optimization Platform E6474A Manuale Utente Scaricare il pdf (Pagina 35)

Set Up Your System 3

Agilent E6474A User’s Guide 35

If your PC does not have an RS- 232 serial port you can use

a serial to USB convertor. Agilent recommends the Agilent

E5805A (USB/4- port RS- 232 Interface Module). When using

other USB interface models, ensure that they support HS

serial communication.

Refer to Figure 15 on page 35 for typical serial port

connection (this diagram does not include a GPS antenna).

Figure 15 Serial port connection for Agilent digital receiver

Connecting multiple E645xC receivers

When you configure multiple receivers, only one receiver

(the master receiver) is physically connected to the

computer and is able to supply input from the GPS. You

attach an external GPS system (unless it has internal GPS)

to the master receiver only. The other receiver(s) receive

their GPS signal from the master receiver. If other receivers

contain internal GPS systems, their GPS is ignored.

If your PC does not have an RS- 232 serial port you can use

a serial to USB convertor. Agilent recommends the Agilent

E5805A (USB/4- port RS- 232 Interface Module). When using

other USB interface models, ensure that they support HS

serial communication.

Serial port

RF Antenna

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 193 194

Nessun commento

Agilent-technologies Wireless Network Optimization Platform E6474A Manuale Utente Pagina 35