Agilent Technologies 3000 X-Series Manuale di Servizio Pagina 52
- Pagina / 128
- Indice
- SEGNALIBRI
Valutato. / 5. Basato su recensioni clienti
52 3000 X-Series Oscilloscopes Advanced Training Guide
3 Advanced Triggering, Search & Navigation, and Segmented Acquisition Labs
occasional violations. Uniquely triggering on edge speed violation signals
can be accomplished on Agilent’s 3000 X- Series oscilloscopes using the
Rise/Fall Time triggering mode.
11 Press the [Trigger] front panel key; then turn the Entry knob to select
the Rise/Fall Time trigger type.
12 Press the Level Select softkey to select Low.
13 Turn the Trigger Level knob to set the lower trigger threshold level to the
approximate 10% level. Note that you can visually use the lower
measurement threshold marker as a good indication as to where the
approximate 10% level is located.
14 Press the Level Select softkey until it indicates High; then turn the Trigger
Level knob to set the upper (high) trigger threshold level to the
approximate 90% level. Note that you can visually use the upper
measurement threshold marker as a good indication as to where the
approximate 90% level is located.
15 Press the “< >” softkey to select “>”.
16 Press the Time softkey; then turn the Entry knob to set the violation
time to > 100 ns.
Your scope should now be triggering on just rising edges of the input
signal that have rise times in excess of 100 ns as shown in Figure 33. In
addition to triggering on Rise/Fall Time violation edges, the Agilent
Figure 33 Using Rise/Fall Time triggering to trigger on violation edge speeds.
- Agilent 3000 X-Series 1
- Oscilloscopes 1
- Contents 3
- Getting Started 5
- Front Panel Overview 6
- Run Control 7
- Waveform Controls 7
- Horizontal Controls 8
- Vertical Controls 9
- Trigger Controls 9
- Tools Controls 10
- Advanced Training Guide 11
- Lab #3: Using Waveform Math 23
- Lab #6: Using Mask Test 35
- Trigger Point 42
- Next Valid Trigger Event 42
- , which is coincident with 70
- Acquisition Labs 71
- C Serial Bus Signals 72
- C data in the “lister” 78
- S Serial Bus Signals 105
- Theory of Operation 111
- DSO Block Diagram 112
- ADC Block 112
- DC Offset Block 113
- Amplifier Block 113
- Attenuator Block 113
- Display DSP Block 115
- Rule of Thumb 119
- Step 2: Calculate f 120
- Related Agilent Literature 125
- C Related Agilent Literature 126
Prodotti e manuali riguardandi Misurazione, test & controllo Agilent Technologies 3000 X-Series
(65 pagine)ASCOM OFFICE 130PRO manuals
Owner’s manuals and user’s guides for Telephones ASCOM OFFICE 130PRO.
We providing 3 pdf manuals ASCOM OFFICE 130PRO for download free by document types: Operations Instructions, User Manual, User's Guide
Commenti su questo manuale