Agilent Technologies 22D Manuale Utente Scaricare il pdf (Pagina 8)

High-Frequency Active Single-ended Probe

Agilent 1156A High-bandwidth Active Single-ended Voltage

• 1.5 GHz probe bandwidth;

< 233 ps rise/fall time

• 100 kΩ, 0.8 pF non-resonant

input impedance

• Small size for easier probing

• Compatible with 6000 Series

oscilloscopes (300 MHz -

1 GHz only)

The Agilent 1156A is a 1.5 GHz

active probe for use with Agilent

6000 Series or Infiniium oscillo-

scopes. Its high bandwidth

(1.5 GHz), low input capacitance

(< 0.8 pF) and high input resist-

ance (100 kΩ) input minimizes

ultra low loading of the DUT,

making it ideal for the companion

for the new 6000 Series oscillo-

scopes. When used with the 6000

Series, the 1156A offers you a full

bandwidth of the scope to the

probe tip, giving you the accurate

insight into your hi-speed device.

Incorporating the most advanced

mechanical and electrical design

technologies, the 1156A provide

smaller, lighter and more rugged

probe tip that enable direct and

easy access to fine pitch ICs and

components. With the 1156A

probe, a damping resistor is

placed as close as possible to the

point being probed, which keeps

the input impedance from res-

onating low, and it also allows a

flat frequency resonance across

the entire bandwidth of the

probe. The 1156A is designed to

withstand 40 V peak AC input

and > 5 kV of ESD, so it will func-

tion reliably in adverse condition.

Key Specifications – Operating Characteristics

Probe Bandwidth (–3dB) > 1.5 GHz

Rise and Fall Time (10% to 90%) 233 psec

Calculated from tr=0.35/bandwidth

System Bandwidth (–3dB) 1156A with MSO/DSO610xA: 1 GHz

Input Capacitance 0.8 pF

Input Resistance 100 kΩ ±1%

Input Dynamic Range ±2.5 V

DC Attenuation 10:1 ± 3% before calibration

10:1 ± 1% after calibration

Offset Range ±15.0 V

Offset Accuracy < 3% of setting before calibration

1% of setting after calibration

Maximum Input Voltage 40 Vpeak, CAT I

ESD Tolerance > 5 kV from 100 pF, 300 Ω HBM

Maximum Number of Probes 4

Supported by 6000 Series

Ordering Information for Agilent 1156A active probe

1156A 1.5 GHz single-ended active probe

Accessories

E2637A Precision measurement kit (includes 2 solderable ground sockets

with 2 green resistive signal pins)

E2638A Solderable-tip 5 cm resistive signal leads (10) with ground leads (3)

For more comprehensive informa-

tion about 1156A active probe,

refer to the Agilent 1156/57/58A

Active Probes Product Overview

with Agilent literature number

5988-3361EN.

Agilent 1156A active probe with

accessories

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 20 21

Commenti su questo manuale

Nessun commento

Agilent Technologies 22D Manuale Utente Pagina 8

Commenti su questo manuale

Prodotti e manuali riguardandi Misurazione, test & controllo Agilent Technologies 22D