Agilent Technologies 8114A Manuale Utente Scaricare il pdf (Pagina 3)

Specifications

Specifications describe the instrument's warranted performance. Non-warranted values are described as typical. All specifica-

tions apply after a 30-minute warm-up phase with 50 W source/load resistance. All specifications are valid from 0°C to 55°C

ambient temperature.

8114A Specifications

Timing Characteristics

Measured at 50% amplitude at fastest transitions in continuous mode and 50

source impedance.

Width: Can be set as width, duty

cycle, or trailing edge delay.

Burst Count: 2 to 65536 (single or

double pulses).

Double Pulse: Two pulses are

generated per pulse period. The

first pulse starts at the start of

the period, the double-delay sets

the delay to the start of the

second pulse. Double pulses are

available in all trigger modes

except External Width.

Delay: Delay, phase or % of period.

Double pulse delay: Double pulse

and delay are mutually exclusive.

The delay between double pulses

can be set as delay or % of period

(minimum period 134 ns)

Duty cycle: Set between 0.1% and

100% (subject to width limits and

period specifications).

Figure 1 shows the specified

operating range for actual duty

cycle and amplitude. Note that in

double pulse mode the actual

duty cycle is twice the displayed

value.

Repeatability: Is typically four

times better than accuracy.

Frequency range

1 Hz to 15.00 MHz

Timing resolution

(period, width)

3 digits, 100 ps best case

RMS jitter

(period, width, delay)

0.03% ± 25 ps

(± 0.05% ± 25 ps for period < 100ns)

Period range

66.7 ns to 999 ms

Accuracy

± 5% ± 100 ps

Width range

10.0 ns to 150 ms (max: period  10.0 ns)

Accuracy

± 5% ± 500 ps

Fixed delay

ns typical

{1}

Additional variable delay range

0.00 ns to 999

ms(max: period - 4 ns)

Accuracy

± 5% ± 1 ns

Resolution

3 digits, 10 ps best case

Transition time (10/90)

into 50

<7 ns (amplitude > 5 V)

High-Z into 50

<12

ns (amplitude >10 V)

Note: [1] Measured between Trigger Output and Output

100

10 20 30 40 50 V

36.9

Duty Cycle

Amplitude (50 Ohm into 50 Ohm)

Specified Operating Range (Single Pulses)

28.1V

Figure 1

1 2 3 4 5 6 7

Commenti su questo manuale

Nessun commento

Agilent Technologies 8114A Manuale Utente Pagina 3

Commenti su questo manuale

Prodotti e manuali riguardandi Misurazione, test & controllo Agilent Technologies 8114A