Agilent 44478A/B
• Switching up to 1 A, 24 W
or 24 VA
• Insertion loss less than
1.9 dB at 1.3 GHz
The 44478A/B multiplexer
module is an ideal choice for
broadband switching of high-
frequency or fast pulse signals.
Dual 1-to-4 multiplexers provide
bi-directional switching of signals
from DC to 1.3 GHz. High channel
isolation (>55 dB at 1 GHz)
assures quality dynamic-range
measurements using spectrum,
network, or distortion analyzers.
Each 1-to-4 multiplexer consists
of seven relays in a “tree”
structure, which provides high
isolation and low VSWR (voltage
standing wave ratio). All the
connectors on the module’s
edge are female BNC for ease
of wiring. Off-channels can be
terminated in resistors to
maintain proper operation of
DUT circuitry. Simply plug a
50/75 Ω SMB-type resistive
termination onto the on-board
male SMB connectors provided
for each channel.
Dual 1 x 4 RF Multiplexer (1.3 GHz, 50/75 Ω)
Specifications
Input Characteristics
Maximum Scan Rate: 43 Chans./sec
Maximum Voltage: 42 V, DC + AC peak
Maximum Current: 1 A
Maximum Power:
(Per channel)
24 W, 24 VA or 44 dBm
Characteristic Impedance:
44478A: 50 Ω
44478B: 75 Ω
DC Performance
Thermal Offset: <6 µV (<2 µV, Typ.)
Initial Closed
Channel Resistance: <1 Ω
Insulation Resistance
(between terminals):
<(25°C, 40% RH) >10
10
Ω
Capacitance:
Center-Center: <0.006 pF
Center-Shield: <60 pF
Rise Time: <300 psec
Signal Delay: <3 nsec
AC Performance
Insertion Loss
≤(40°C, 95% RH) 10 MHz <0.3 dB
100 MHz <0.7 dB
500 MHz <1.5 dB
1.3 GHz <3.0 dB
≤(25°C, 40% RH) 10 MHz <0.2 dB
100 MHz <0.5 dB
500 MHz <1.1 dB
1.3 GHz <1.9 dB
Crosstalk
Channel-Channel, Channel-Common
10 MHz <-90 dB
100 MHz <-80 dB
500 MHz <-65 dB
1.3 GHz <-55 dB
Group-Group, Module-Module
10 MHz <-90 dB
100 MHz <-80 dB
500 MHz <-70 dB
1.3 GHz <-60 dB
VSWR 10 MHz <1.20
100 MHz <1.25
500 MHz <1.35
1.3 GHz <1.55
16
Commenti su questo manuale