Agilent Technologies Ininiium 9000 Guida di Configurazione Scaricare il pdf (Pagina 17)

Inﬁniium 9000 Series performance characteristics

Vertical: scope channels 9064A 9104A 9254A 9404A

Analog bandwidth (–3 dB) 50 Ω

600 MHz 1.0 GHz 2.5 GHz 4 GHz

1MΩ 500 MHz 500 MHz 500 MHz 500 MHz

Typical Rise Time / Fall 540 ps 253 ps 142 ps 85 ps

Time 10% to 90% at 50 Ω

Typical Rise Time / Fall 360 ps 174 ps 98 ps 59 ps

Time 20% to 80% at 50 Ω

Input channels DSO9000 – 4 analog

MSO9000 – 4 analog + 16 digital

Input impedance

50 Ω ± 2.5%, 1 MΩ ± 1% (11pF typical)

Input sensitivity

1 MΩ: 1 mV/div to 5 V/div

50 Ω: 1 mV/div to 1 V/div

Input coupling 1 MΩ: AC (3.5 Hz), DC

50 Ω:DC

Bandwidth limit 20 MHz on 1 MΩ input ; 500 MHz up to full scope bandwidth in increments of 500 MHz

Vertical resolution

2,3

8 bits, ≥12 bits with averaging

Channel-to-channel isolation DC to 50 MHz: 50 dB

>50 MHz to 2.5 GHz: 40 dB

>2.5 GHz to 4 GHz: 25 dB

DC gain accuracy

1,2,3

± 2% of full scale at full resolution on channel scale ± 5 ˚C from cal temp

Maximum input voltage

1 MΩ: 150V RMS or DC, CAT I

± 250 V (DC + AC) in AC coupling

50 Ω: 5 Vrms

Offset range Vertical sensitivity Available offset

1 MΩ 1 mV to <10 mV/div ± 2 V

10 mV to <20 mV/div ± 5 V

20 mV to <100 mV/div ± 10 V

100 mV to <1 V/div ± 20 V

1 V to 5 V/div ± 100 V

50 Ω ±12 div or ±4V, whichever is smallest

1 Denotes warranted specifications, all others are typical. Specifications are valid after a 30-minute warm-up period and ±5 °C from firmware calibration temperature. Input

impedance is valid when V/div scaling is adjusted to show all waveform vertical values within scope display.

2 Vertical resolution for 8 bits = 0.4% of full scale, for 12 bits = 0.024% of full scale.

3 50Ω input: Full scale is defined as 8 vertical divisions. Magnification is used below 10mV/div, full-scale is defined as 80 mV. The major scale settings are 5mV, 10mV, 20mV, 50

mV, 100mV, 200 mV, 500 mV, 1V.

1MΩ input: Full scale is defined as 8 vertical divisions. Magnification is used below 5mV/div, full-scale is defined as 40 mV. The major scale settings are 5mV, 10mV, 20mV, 50

mV, 100 mV, 200 mV, 500 mV, 1V,2V, 5V.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 27 28

Commenti su questo manuale

Nessun commento

Agilent Technologies Ininiium 9000 Guida di Configurazione Pagina 17

Commenti su questo manuale

Prodotti e manuali riguardandi Misurazione, test & controllo Agilent Technologies Ininiium 9000