Agilent Technologies 85032B/E 50 Manuale Utente Scaricare il pdf (Pagina 3)

Receiver

Frequency range 8712B 8714B

Narrowband 300 kHz 300 kHz

to 1.3 GHz to 3.0 GHz

Broadband 0.10 to 1.3 GHz 0.10 to 3.0 GHz

Dynamic range

Narrowband >100 dB, ≥5 MHz

50 ohm (+10 to -90 dBm) >100 dB

>60 dB <5 MHz (+10 to -90 dBm)

(+10 to -50 dBm)

Narrowband >97 dB, >5 MHz >97 dB

75 ohm (+10 to -87 dBm) (+10 to -87 dBm)

>57 dB, <5 MHz

(+10 to -47 dBm)

Broadband

50 ohm >66 dB <66 dB

(+16 to -50 dBm) (+16 to -50 dBm)

75 ohm >63 dB >63 dB

(+16 to -47 dBm) (+16 to -47 dBm)

Damage level +23 dBm, +23 dBm,

+25 VDC +25 VDC

Maximum input

Narrowband +10 dBm +10 dBm

(0.5 dB compression)

Broadband +16 dBm +16 dBm

(0.55 dB compression)

2. Receiver dynamic range is calculated as the difference between maximum receiver input level and receiver’s noise floor. System dynamic range applies to transmission meas-

urements only, since reflection measurements are limited by directivity. Noise floor is specified as the mean trace noise at specified CW frequencies. A signal at this level

would have a signal to noise ratio of 3 dB. Noise floor is measured with test ports terminated in loads, response and isolation calibration, 15 Hz IF bandwidth, 10 dB source

power and no averaging.

1 2 3 4 5 6 7 8 ... 11 12

Commenti su questo manuale

Nessun commento

Agilent Technologies 85032B/E 50 Manuale Utente Pagina 3

Commenti su questo manuale

Prodotti e manuali riguardandi Misurazione, test & controllo Agilent Technologies 85032B/E 50