Agilent Technologies E4400-60230 g Manuale Utente Pagina 319
- Pagina / 446
- Indice
- SEGNALIBRI
Valutato. / 5. Basato su recensioni clienti
Real-Time I/Q Baseband Generator User’s and Programming Guide 4-75
ESG Family Signal Generators Programming Commands and Examples
Options UN8 and 202 Programming Commands
PDC UVOX Channel Timeslot
[:SOURce]:RADio:PDC:SLOT0|[1]|2|3|4|5:UVOX:SWORd <bit pattern>
[:SOURce]:RADio:PDC:SLOT0|[1]|2|3|4|5:UVOX:SWORd?
This command changes the synchronization word, which is used for slot synchronization,
equalizer training, and timeslot identification. The *RST hexadecimal value reflects the
value specified by the indicated standard.
Range: 00000 to FFFFF
*RST values: 785B4 (UTCH and UVOX), 87A4B (DTCH)
Tail (T1, T2) Fields
[:SOURce]:RADio:EDGE:SLOT0|[1]|2|3|4|5|6|7:NORMal:T1 <9-bit pattern>
[:SOURce]:RADio:EDGE:SLOT0|[1]|2|3|4|5|6|7:NORMal:T1?
[:SOURce]:RADio:EDGE:SLOT0|[1]|2|3|4|5|6|7:NORMal:T2 <9-bit pattern>
[:SOURce]:RADio:EDGE:SLOT0|[1]|2|3|4|5|6|7:NORMal:T2?
This command enables you to define the binary value for both of the 9-bit tail fields in each
normal timeslot. Use hexadecimal for the value in the SCPI command (precede the value
with #H); the signal generator will convert it to binary.
Range: 0 through 1FF
*RST value: 1FF
Timeslot Configuration - Amplitude, State, Type
Timeslot Amplitude
DECT - Portable Part Timeslots
[:SOURce]:RADio:DECT:PPart:SLOT0|[1]|2|3|4|5|6|7|8|9|10|11:POWer MAIN|
DELTa
[:SOURce]:RADio:DECT:PPart:SLOT0|[1]|2|3|4|5|6|7|8|9|10|11:POWer?
This command toggles the selected timeslot RF output power as main or alternate (delta).
This feature is only available with the Alternate Power Control Option UNA.
*RST value: Main
DECT - Radio Fixed Part Timeslots
[:SOURce]:RADio:DECT:RFPart:SLOT0|[1]|2|3|4|5|6|7|8|9|10|11:POWer MAIN|
DELTa
[:SOURce]:RADio:DECT:RFPart:SLOT0|[1]|2|3|4|5|6|7|8|9|10|11:POWer?
This command toggles the selected timeslot RF output power as main or alternate (delta).
This feature is only available with the Alternate Power Control Option UNA.
*RST value: Main
- Agilent Technologies 1
- ESG Family Signal Generators 1
- Option UN8 Real-Time I/Q 1
- Includes Option 202, EDGE 1
- Contents 10
- Options UN8 and 202 17
- APCO 25 Options UN8 and 202 18
- Bluetooth 19
- CDPD Options UN8 and 202 20
- Options UN8 and 202 Custom 21
- DECT Options UN8 and 202 22
- EDGE (Option 202 Only) 23
- GSM Options UN8 and 202 24
- Options UN8 and 202 NADC 25
- PDC Options UN8 and 202 26
- Options UN8 and 202 PHS 27
- TETRA Options UN8 and 202 28
- 2 Using Functions 29
- Setting the Carrier Frequency 30
- Setting the Power Level 30
- Selecting the Desired Format 31
- Setting Up the First Timeslot 31
- 4 1’s & 4 0’s On 32
- Down TCH) 32
- Up Custom) 32
- Using Custom Format 33
- Customizing the Burst Shape 35
- 1 > Enter. This will 40
- −1 by pressing 41
- 2 > Enter. This 41
- 0 > Enter. This 41
- Creating a Symbol Map 44
- Moving an I/Q Symbol 47
- FSK Table Editor 50
- Frequency terminator softkeys 51
- Active entry area 52
- Load Default FSK softkey menu 52
- More (2 of 2) > Edit Item 53
- Softkey menu with 61
- Selecting Stored Files 63
- Selecting a Custom FSK File 65
- Using the Bit File Editor 66
- Editing Keys > Clear Text 67
- USER1 is a copy of UNTITLED 68
- Cursor moves to new position 69
- Position indicator changes 69
- Hex Data changed 69
- USER1 has been named USER2 70
- 3 Softkey Reference 71
- Numerics 73
- 16 1’s & 16 0’s 79
- 800 MHz Base 87
- 800 MHz Mobile 88
- 1500 MHz Base 88
- 1500 MHz Mobile 88
- , the synchronizing pulse is 89
- Softkey Locations 89
- APCO 25 C4FM 90
- APCO 25 w/C4FM 90
- APCO 25 w/CQPSK 90
- BBG Data Clock Ext Int 92
- Begin Pattern 93
- Begin Timeslot 93
- Bit Clock 94
- BNC MUX Settings 94
- Burst Shape 95
- Burst Shape Type 95
- Channel Band 98
- Channel Number 99
- Configure Access 99
- Configure Custom 100
- Configure Dn Custom Cont 102
- Configure Dn Custom Disc 103
- Configure Dn Normal Cont 104
- Configure Dn Normal Disc 105
- Configure Dn Sync Cont 106
- Configure Dn Sync Disc 107
- Configure Down Custom 108
- Configure Down TCH 109
- Configure Dummy 111
- Configure Dummy Bearer 1 112
- Configure Dummy Bearer 2 113
- Configure FCorr 114
- Configure Frame 115
- Configure Hardware 115
- Configure Low Capacity 115
- Configure Normal 117
- Configure Sync 120
- Configure TCH 122
- Configure Timeslots 123
- Configure Traffic Bearer 124
- Configure Up Control 1 126
- Configure Up Control 2 127
- Configure Up Custom 128
- Configure Up Normal 129
- Configure Up TCH 130
- Configure Up VOX 132
- Control Channel Dnlink Uplink 133
- Custom Off On 134
- Data Format Pattern Framed 138
- Data Clk Out 139
- Define User Burst Shape 141
- Define User FIR 141
- Define User FSK 142
- Define User I/Q 142
- Delete All Rows 142
- Display Burst Shape 144
- Display FFT 144
- Display Impulse Response 145
- Display I/Q Map 145
- Dn Custom Cont 146
- Dn Custom Disc 147
- Dn Normal Cont 147
- Dn Normal Disc 148
- Dn Sync Cont 148
- Dn Sync Disc 149
- Down Custom 149
- Downlink MCS-1 150
- Downlink MCS-5 150
- Downlink MCS-9 150
- Down TCH 150
- Down TCH All 151
- Dummy Bearer 1 151
- Dummy Bearer 2 151
- E Field Data 152
- E-GSM Mobile 152
- E-TCH/F43.2 153
- EDGE (Rev 8.3.0 Release 1999) 153
- EDGE Off On 153
- Edit Fall Shape 154
- Edit File 154
- Editing Keys 154
- Edit Rise Shape 155
- Ext Data Clock Normal Symbol 157
- Ext Delay Bits 158
- Ext Delay Off On 159
- External 13 MHz Off On 159
- Filter Factor N/A 165
- Filter Symbols 165
- Frame Repeat Single Cont 167
- Frame Trigger 168
- Freq Channels 169
- Freq Channels Off On 169
- Mode >TDMA > 170
- Gated Clock 172
- Goto Bottom Row 173
- Goto Middle Row 173
- Goto Row 173
- Goto Top Row 173
- Gray Coded QPSK 174
- GSM 450 Base 174
- GSM 850 Mobile 176
- GSM Off On 176
- IS-95 and IS-2000 179
- IS-95 Mod 179
- IS-95 w/EQ 180
- IS-95 Mod w/EQ 180
- IS95 OQPSK 180
- Load Default FIR 183
- Load Default FSK 183
- Load Default I/Q Map 183
- Load From Selected File 183
- Load/Store 184
- Low Capacity 185
- Low Capacity with Z Field 185
- Manual Reset & Run 186
- Mirror Table 186
- Modify Standard 186
- Modulation Type 187
- Multiframe Channel 188
- Multiframe Data 188
- Multiframe Trigger 188
- Number of Bits 190
- Offset Q Off On 192
- Optimize FIR For EVM ACP 192
- Other Patterns 194
- Oversample Ratio 195
- Pattern Repeat Single Cont 196
- Pattern Trigger 196
- Phase Polarity Normal Invert 198
- Predefined Mode 206
- QPSK and OQPSK 210
- Rate Full Half 211
- Recall Secondary Frame State 211
- Restore DECT Factory Default 212
- Restore Default Burst Shape 213
- Restore Default Filter 213
- Restore Default Symbol Rate 214
- R-GSM Mobile 216
- S DECT Format 218
- Save Secondary Frame State 219
- Scramble Off On 219
- Scramble Seed 220
- Secondary Frame Off On 220
- Secondary Frame Trigger 221
- Options UN8 and 202 S 223
- Symbol Sync Out 225
- SYNC In the NADC Format 226
- Sync Out Offset 227
- TETRA Off On 230
- Timeslot # 230
- Timeslot Off On 231
- Timeslot Type 231
- Traffic Bearer 232
- Traffic Bearer with Z Field 232
- Transmit Link RFP PP 232
- Trigger In Polarity Neg Pos 233
- UN3/4 GSM 236
- Gaussian 236
- Up Control 1 236
- Up Custom 237
- Uplink MCS-1 238
- Uplink MCS-5 238
- Uplink MCS-9 238
- Up Normal 239
- User FSK 242
- W Options UN8 and 202 244
- 4 Programming 245
- Programming Commands 246
- Broadcast Bit Field 252
- PN9 Mode 253
- Color Code Field 257
- Data Clock Input Configuration 258
- Data Out 274
- Default State 274
- Differential Data Encoding 275
- Differential Encoding 275
- EDGE BNC MUX Settings 276
- Extended Tail (ET) Field 276
- External Data Delay Query 277
- Frame Repeat 279
- Frame Transmission Rate 279
- FIX4 Data 284
- FSK Deviation 296
- Guard Field 297
- Idle Field 297
- I/Q Scaling 298
- Mode State 299
- MSK Phase 304
- Multiframe PN Sequence 306
- Personal Station ID Code 308
- Phase Polarity 308
- Steal Bit 315
- Symbol Rate 315
- Synchronization Word Field 318
- Tail (T1, T2) Fields 319
- Training Sequence Field 326
- Trigger Source 330
- Unique Word Field 330
- User FSK Files 331
- User I/Q Files 331
- Programming Examples 332
- Program Comments 335
- 6 Theory of Operation 417
- Control (Option UNA only) 420
- Burst Shape: 422
- Data Clock Timing Patterns 424
- 1st Symbol 428
- Data Value 00000001 429
- Data Value 00000010 429
- Data Value 00000011 429
- Index I-1 431
- I-2 Index 432
- Index I-3 433
- I-4 Index 434
- Index I-5 435
- I-6 Index 436
- Index I-7 437
- I-8 Index 438
- Index I-9 439
- I-10 Index 440
- Index I-11 441
- I-12 Index 442
- Index I-13 443
- I-14 Index 444
- Index I-15 445
- I-16 Index 446
Prodotti e manuali riguardandi Generatori elettrici Agilent Technologies E4400-60230 g
(426 pagine)© 2020, manymanuals.it. Tutti i diritti riservati | 0.033 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commenti su questo manuale