Agilent Technologies 71501D Manuale Utente Scaricare il pdf (Pagina 22)

Getting Started

Steps for Setting Up Eye-Diagram Analysis

Connections

without a Laser

Source and

Converter

If a laser source and optical-to-electrical converter are not available, use the

alternate connection shown in the following figure. In this case, the pattern

generator’s data output is displayed. An electrical device could be inserted

between the pattern generator and the eye-diagram analyzer.

Step 2. Load the Personality

Automatically

Load the

Personality

1 Insert the eye-diagram personality card into the front-panel card slot of the

microwave transition analyzer, facing the metal strip on the card downward

and toward the instrument. Make sure the card is fully inserted into the card

slot.

2 Switch on the power to all of the equipment. Switch on the power to the

70820A last. The start up process takes about 6 minutes.

Note Do not press any instrument keys until the program is loaded. Pressing keys

can cause the automatic program loading to abort.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 175 176

Nessun commento

Agilent Technologies 71501D Manuale Utente Pagina 22