Agilent Technologies HP8648A Manuale Utente Scaricare il pdf (Pagina 154)

100

101

AM Receivers

153

Measurement Procedure:

1. Connect the Receiver as shown.

On the Test Set:

2. Press the PRESET key.

3. Press the RX key.

Using the knob and data entry keys:

4. Set RF Gen Freq to the receiver operating frequency.

5. Set Amplitude to −47 dBm (1 mV).

6. Set AFGen1 To AM at desired modulation depth (typically 30%).

7. Set Ext Load R to the test load resistance.

8. Set AC Level meter to measure Watts.

On the Radio set the Receiver’s Controls as follows:

9. Set power to ON.

10. If required, set frequency to the same value as step 4.

11. Set RF Gain to maximum (if equipped).

12. Set squelch control to minimum (if equipped).

13. Set the volume control until the AC Level reads 100% of the Receiver’s

specified audio output.

Refer to the audio output specifications for the receiver being tested.

Additional Equipment

Required

Test Load

Special Test Considerations

See "Receiver Test Loads" on page 46.

1 2 ... 149 150 151 152 153 154 155 156 157 158 159 ... 319 320

Commenti su questo manuale

Nessun commento

Agilent Technologies HP8648A Manuale Utente Pagina 154

Commenti su questo manuale

Prodotti e manuali riguardandi Misurazione, test & controllo Agilent Technologies HP8648A