Agilent Technologies InfiniiVision 6000 Series Manuale Utente Scaricare il pdf (Pagina 10)

Single-ended Active Probes

Agilent 1156A Single-ended Active Voltage

• 1.5 GHz probe bandwidth;

< 233 ps rise/fall time

• 100 kΩ, 0.8 pF non-resonant input

impedance

• Small size for easier probing

• Compatible with 5000, 6000 and

7000 Series (except for 6000 Series

100 MHz models)

The Agilent 1156A is a 1.5GHz

active probe for use with

Agilent InfiniiVision or Infiniium

oscilloscopes. Its high bandwidth

(1.5GHz), low input capacitance

(0.8pF) and high input resistance

(100 kΩ) input minimizes ultra low

loading of the DUT, making it ideal

for the companion for the 5000, 6000

or 7000 Series oscilloscopes. When

used with the 5000, 6000 or 7000

Series, the 1156A offers you a full

bandwidth of the scope to the probe

tip, giving you the accurate insight

into your hi-speed device.

Incorporating the most advanced

mechanical and electrical design

technologies, the 1156A provides

smaller, lighter and more rugged

probe tip that enables direct and

easy access to fine pitch ICs and

components. With the 1156A probe,

a damping resistor is placed as close

as possible to the point being probed,

which keeps the input impedance

from resonating low, and it also

allows a flat frequency resonance

across the entire bandwidth of the

probe. The 1156A is designed to

withstand 40-V peak AC input and

> –5-kV of ESD, so it will function

reliably in adverse condition.

Key Characteristics

Probe bandwidth (–3dB) > 1.5 GHz

Rise and fall time (10% to 90%)

calculated from tr = 0.35/bandwidth

233 psec

System bandwidth (–3dB) 1156A 1 GHz Inﬁ niiVision 6000/7000

scope: 1 GHz

Input capacitance 0.8 pF

Input resistance 100 kΩ ± 1%

Input dynamic range

5 Vp-p

DC attenuation 10:1 ± 3% before calibration

10:1 ± 1% after calibration

Offset range ±15.0 V

Offset accuracy < 3% of setting before calibration

1% of setting after calibration

Maximum input voltage 40 Vpeak, CAT I

ESD tolerance > 5 kV from 100 pF, 300 Ω HBM

Maximum number of probes

supported by 5000/6000/7000 Series

Note

: for waveforms with edges >3 nsec, dynamic range is >12 Vp-p.

Ordering information for Agilent 1156A active probe

1156A 1.5 GHz single-ended active probe

Accessories

E2637A Precision measurement kit (includes 2 solderable ground sockets with

2 green resistive signal pins)

E2638A Solderable-tip 5 cm resistive signal leads (10) with ground leads (3)

E2639A Micro clips, Qty. 4

E2640A Resistive signal tips Qty. 8

E2641A Ground blade assembly Qty. 8

For more comprehensive information

about 1156A active probe, refer to

the Agilent 1156/57/58A Active

Probes Product Overview with Agilent

literature number 5988-3361EN.

Agilent 1156A active probe with

accessories

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 21 22

Commenti su questo manuale

Nessun commento

Agilent Technologies InfiniiVision 6000 Series Manuale Utente Pagina 10

Commenti su questo manuale

Prodotti e manuali riguardandi Misurazione, test & controllo Agilent Technologies InfiniiVision 6000 Series