Agilent Technologies InfiniiVision 6000 Series Manuale Utente Scaricare il pdf (Pagina 17)

17

Wedge Probe Adapters

• Easy connection to surface

mount ICs

• Safe, with no chance of shorting

• Mechanically non-invasive contact

• 3-, 8-, and 16-signal versions

• Supports 0.5 mm and 0.65-mm

TQFP and PQFP packages

Problem-free probing

The Agilent Wedge Probe Adapter

eliminates many of the frustrations

associated with probing surface

mount components. If you’ve ever

accidentally shorted IC pins together,

experienced electrical and/or

mechanical problems with soldering

small wires onto leads, or gotten

frustrated juggling multiple probes

while you’re trying to operate your

scope, the Wedge was designed with

you in mind.

Make the inaccessible

accessible

When you use the Wedge, you don’t

have to worry about shorting IC pins

together on a delicate component

– or worse yet on an irreplaceable

prototype. The Wedge is easy to

insert and it stays put. There’s no

need to solder small wires onto

leads. The Wedge is mechanically

non-invasive, so you won’t damage

the legs of the IC. Instead, you’ll

have easy access to hard-to-reach

components.

Electrical reliability

The Wedge makes two contact

points with each leg of the IC. This

redundant physical connection

increases the electrical reliability of

the connection. And the Wedge’s low

capacitance and inductance provides

superior performance to many other

alternatives.

IC clip kits

An inexpensive solution for probing

fine-pitch ICs, the 10072A SMT Kit

includes ten IC clips and two dual-

lead adapters that connect the clips

directly to 10070-family probes.

The 10075A 0.5-mm IC clip kit is

ideal for connecting to IC’s as fine as

0.5-mm. The clip body allows many

clips to be mounted side-by-side. The

kit includes four 0.5-mm IC clips and

two dual-lead adapters that connect

the IC clips directly to 10070-family

probes.

Agilent Wedge electrical

characteristics

Operating

voltage

< 40 V dc + peak ac

Operating

current

0.5 A maximum

Capacitance

between

contacts

2 pF typical (all except

Agilent-E2643A/44A)

4.33 pF typical at 1-MHz

(Agilent-E2643A/44A)

Self-

inductance

15 nH typical (all except

Agilent-E2643A/44A)

37 nH typical at 1-MHz

(Agilent E2642A/44A)

Cross

coupling

–31 dB typical at 100-MHz

(Agilent-E2643A/44A)

Contact

resistance

< 0.1 Ω

Ordering information

E2613A 0.5 mm Wedge probe

adapter, 3-signal, qty 1

E2613B 0.5 mm Wedge probe

adapter, 3-signal, qty 2

E2614A 0.5 mm Wedge probe

adapter, 8-signal, qty 1

E2643A 0.5 mm Wedge probe

adapter, 16-signal, qty 1

E2615A 0.65 mm Wedge probe

adapter, 3-signal, qty 1

E2615B 0.65 mm Wedge probe

adapter, 3-signal, qty 2

E2616A 0.65 mm Wedge probe

adapter, 8-signal, qty 1

E2644A 0.65 mm Wedge probe

adapter, 16-signal, qty 1

10072A SMT kit for 10070 probe

family

10075A 0.5 mm IC clip kit

1 2 ... 12 13 14 15 16 17 18 19 20 21 22

Commenti su questo manuale

Nessun commento