Agilent Technologies E8364C Manuale Utente Scaricare il pdf (Pagina 17)

E8362/3/4C

Test port input continued

Description Specification Supplemental information

Standard, 014, UNL UNL and 014

Direct receiver access input noise floor

1,2

- Option 080 enabled

10 Hz IF bandwidth

10 to 45 MHz

< -127 dBm < -127 dBm

45 to 500 MHz

< -126 dBm < -126 dBm

500 MHz to 2 GHz < -132 dBm < -132 dBm

2 to 10 GHz < -131 dBm < -131 dBm

10 to 20 GHz < -133 dBm < -133 dBm

20 to 40 GHz < -124 dBm < -124 dBm Option 016 degrades performance by 2 dB

40 to 50 GHz < -122 dBm < -122 dBm Option 016 degrades performance by 2 dB

1 kHz IF bandwidth

10 to 45 MHz

< -107 dBm < -107 dBm

45 to 500 MHz

< -106 dBm < -106 dBm

500 MHz to 2 GHz < -112 dBm < -112 dBm

2 to 10 GHz < -111 dBm < -111 dBm

10 to 20 GHz < -113 dBm < -113 dBm

20 to 40 GHz < -104 dBm < -104 dBm Option 016 degrades performance by 2 dB

40 to 50 GHz < -102 dBm < -102 dBm Option 016 degrades performance by 2 dB

Receiver compression level (measured at test ports)

10 MHz to 20 GHz

< 0.1 dB at -5 dBm

and

< 0.45 dB at +5 dBm

20 to 30 GHz

< 0.1 dB at -9.5 dBm

and < 0.45 dB at 0 dBm

30 to 40 GHz < 0.1 dB at -12.5 dBm

and < 0.45 dB at -3 dBm

40 to 50 GHz < 0.1 dB at -12.5 dBm

and < 0.45 dB at -3 dBm

System compression level max output power See dynamic accuracy

chart

Third order intercept – Tone spacing from 100 kHz to 5 MHz

Typical:

10 to 150 MHz

+33 dBm

150 to 300 MHz +34 dBm

300 to 500 MHz +30 dBm

500 MHz to 20 GHz +24 dBm

20 to 40 GHz +18 dBm

40 to 50 GHz +15 dBm

Third order intercept – Tone spacing from 5 MHz to 20 MHz

Typical:

10 to 500 MHz

+20 dBm

500 MHz to 20 GHz +20 dBm

20 to 40 GHz +16 dBm

40 to 50 GHz +15 dBm

Third order intercept – Tone spacing from 20 MHz to 50 MHz

Typical:

10 to 500 MHz

+26 dBm

500 MHz to 20 GHz +26 dBm

20 to 40 GHz +20 dBm

40 to 50 GHz +19 dBm

1. Total average (rms) noise power calculated as mean value of a linear magnitude

trace expressed in dBm.

2. Typical performance.

3. Noise floor may be degraded by 10 dB at particular frequencies (multiples of 5 MHz)

due to spurious receiver residuals.

4. 0 Hz offset.

5. This compression level comes from the dynamic accuracy curve with -30 dB

reference test port power.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 64 65

Commenti su questo manuale

Nessun commento

Agilent Technologies E8364C Manuale Utente Pagina 17

Commenti su questo manuale

Prodotti e manuali riguardandi Misurazione, test & controllo Agilent Technologies E8364C