Agilent Technologies E8364C Manuale Utente Scaricare il pdf (Pagina 41)

E8361C

Test port input continued

Description Specification Option UNL Supplemental

Standard or Option 014 and Option 014 information

Third Order Intercept

– Tone spacing from 100 kHz to 5 MHz

Typical:

10 to 500 MHz +30 dBm

500 MHz to 24 GHz +24 dBm

24 to 40 GHz +23 dBm

40 to 50 GHz +24 dBm

50 to 67 GHz +26 dBm

Third Order Intercept

– Tone spacing from 5 to 20 MHz

Typical:

10 to 500 MHz

Not applicable

500 MHz to 24 GHz +20 dBm

24 to 40 GHz +20 dBm

40 to 50 GHz +22 dBm

50 to 67 GHz +24 dBm

Third Order Intercept

– Tone spacing from 20 to 50 MHz

Typical:

10 to 500 MHz

Not applicable

500 MHz to 24 GHz +26 dBm

24 to 40 GHz +24 dBm

40 to 50 GHz +25 dBm

50 to 67 GHz +27 dBm

System compression level – at maximum leveled output power

See Dynamic Accuracy Chart

Trace noise magnitude

10 to 45 MHz

< 0.150 dB rms < 0.150 dB rms

45 to 500 MHz

4, 5

< 0.010 dB rms < 0.010 dB rms 1 kHz IF bandwidth

500 MHz to 24 GHz < 0.006 dB rms < 0.006 dB rms ratio measurement, nominal

24 to 67 GHz < 0.006 dB rms < 0.009 dB rms power at test port

67 to 70 GHz

< 0.006 dB rms < 0.009 dB rms

Trace noise magnitude

– Option 080 enabled

10 to 45 MHz

< 0.150 dB rms < 0.150 dB rms

45 to 500 MHz

4, 5

< 0.010 dB rms < 0.010 dB rms 1 kHz IF bandwidth

500 MHz to 24 GHz < 0.006 dB rms < 0.006 dB rms ratio measurement, nominal

24 to 67 GHz < 0.009 dB rms < 0.012 dB rms power at test port

67 to 70 GHz < 0.009 dB rms < 0.012 dB rms

Trace noise phase

10 to 45 MHz

< 0.800° rms < 0.800° rms

45 to 500 MHz

< 0.100° rms < 0.100° rms 1 kHz IF bandwidth

500 MHz to 24 GHz < 0.060° rms < 0.060° rms ratio measurement, nominal

24 to 67 GHz < 0.100° rms < 0.100° rms power at test port

67 to 70 GHz

< 0.100° rms < 0.100° rms

Trace noise phase

– Option 080 enabled

10 to 45 MHz

< 0.800° rms < 0.800° rms 1 kHz IF bandwidth

45 to 500 MHz

< 0.100° rms < 0.100° rms ratio measurement, nominal

500 MHz to 24 GHz < 0.060° rms < 0.060° rms power at test port

24 to 67 GHz < 0.100° rms < 0.100° rms

67 to 70 GHz < 0.100° rms < 0.100° rms

1. Third order intercept is a typical specification that applies while the network

analyzer receiver is in its linear range.

2. Typical performance.

3. 0 Hz offset.

4. Trace noise magnitude may be degraded to 20 mdB rms at harmonic frequencies

of the first IF (8.33 MHz) below 80 MHz.

5. Specified value is for worst-case noise floor at 45 MHz.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 64 65

Commenti su questo manuale

Nessun commento

Agilent Technologies E8364C Manuale Utente Pagina 41

Commenti su questo manuale

Prodotti e manuali riguardandi Misurazione, test & controllo Agilent Technologies E8364C