Agilent Technologies 86100D Manuale Utente Scaricare il pdf (Pagina 3)

Specifications

General and mainframe

Specifications describe warranted performance over the

temperature range of +10 °C to +40 °C (unless otherwise

noted). The specifications are applicable for the temperature

after the instrument is turned on for one (1) hour, and while

self-calibration is valid. Many performance parameters

are enhanced through frequent, simple user calibrations.

Characteristics provide useful, non-warranted information

about the functions and performance of the instrument.

Characteristics are printed in italic typeface. Product

specifications and descriptions in this document are subject

to change without notice.

Comparing specifications

When comparing performance attributes between

instruments, ensure you compare the same type of

parameter. For example, compare warranted specifications

from both instruments, or compare characteristics or

typical performance. Warranted specifications include

measurement uncertainties and are conservative compared

to other types of unwarranted attributes.

Factory Calibration Cycle - For optimum performance,

the instrument should have a complete verification of

specifications once every twelve (12) months.

Temperature Operating

Non-operating

10 °C to +40 °C (50 °F to +104 °F)

–40 °C to +65 °C (–40 °F to +158 °F)

Altitude Operating Up to 4,600 meters (15,000 feet)

Power (max) 100/120Vac 50/60/400 Hz

220/240Vac 50/60 Hz, 700 Watts Maximum

With typical modules: 150 VA to 230 VA

at 25°C

Weight Mainframe without modules

Typical module

20.5 kg (43 lb)

1.2 kg (2.6 lb)

Mainframe dimensions (excluding

handle)

Without front connectors and rear feet

With front connectors and rear feet

With front cover and rear feet

221 mm H x 426 mm W x 530 mm D

(7 inch x 16.76 inch x 20.9 inch)

234 mm H x 426 mm W x 601 mm D

(9.23 inch x 16.76 inch x 23.67 inch)

234 mm H x 426 mm W x 612 mm D

(9.23 inch x 16.76 inch x 24.1 inch)

Max relative humidity

80% for temperatures up to 31°C decreasing linearly to 50% relative humidity at 40°C

Supply voltage variation

86100D system can operate with supply voltage fluctuations up to ± 10% of the nominal

voltage

Mainframe specifications

Horizontal system (time base)

Scale factor (full scale is ten divisions)

Minimum

Maximum

2 ps/div (with 86107A or 86100D-PTB : 500 fs/div)

1 s/div

Pattern lock

250 ns/div

Delays

Minimum

Maximum

24 ns

1000 screen diameters or 10 s

whichever is smaller

40.1 ns default, 24 ns min

1000 screen diameters or 25.401 μs

whichever is smaller

Time interval accuracy

1 ps + 1.0% of Δ time reading

or 8 ps,

whichever is smaller

Jitter mode operation

Time interval accuracy - jitter mode operation 1 ps

Time interval resolution ≤ (screen diameter)/(record length) or

62.5 fs, whichever is larger

Display units Bits or time (TDR mode–meters)

General specifications

1. Time offset relative to the front panel trigger input on the instrument mainframe.

2. Dual marker measurement performed at a temperature within 5 °C of horizontal calibration temperature.

3. The maximum delay setting is 100 ns and delta time does not span across (28 + Nx4)ns ± 100 ps delay setting, where N=0,1,2….18. If delta time measurement spanexceeds

above criteria, time interval accuracy is 8 ps +0.1% of Δ time reading.

4. Characteristic performance. Test configuration: PRBS of length 127 bits, Data and Clock 10 Gb/s.

5. Maximum number of samples depends on pattern, number of active channels and available memory.

1 2 3 4 5 6 7 8 ... 35 36

Commenti su questo manuale

Nessun commento

Agilent Technologies 86100D Manuale Utente Pagina 3

Commenti su questo manuale

Prodotti e manuali riguardandi Misurazione, test & controllo Agilent Technologies 86100D