Agilent Technologies 86100D Manuale Utente Scaricare il pdf (Pagina 31)

Ordering information

(8.5 to 14.025 Gb/s)

86115D-102 Identical capability as 86115D-002, 14.025 Gb/s

filters not included

86115D-142 Identical capability as 86115D-002, only filters

provided are 14.025 Gb/s

86115D-282 Two optical channels with filters for 15, 25.78,

27.95, 28.05 Gb/s (contact Agilent for 14.025 Gb/s

filter)

86115D-004 Four optical ports with filters for all rates listed (8.5

to 14.025 Gb/s) mulitplexed to two optical

channels through 2 integral 1X2 optical switches

86115D-104 Identical capability as 86115D-004, 14.025 Gb/s

filters not included

86115D-144 Identical capability as 86115D-004, only filters

provided are 14.025 Gb/s

86115D-IRC System impulse response correction calibration

86116C

40 to 65 GHz optical / 80 GHz electrical sampling

module, 1300 to 1620 nm

86116C-IRC

System impulse response correction calibration

This module is not compatible with the 86100A and 86100B DCA

mainframes. If you want to upgrade older DCAs, contact Agilent

Technologies to discuss current trade-in deals.

All optical modules have FC/PC connectors installed on each optical port.

Other connector adapters available as options are: Diamond HMS-10, DIN,

ST and SC.

86116C

40 to 65 GHz optical / 80 GHz electrical sampling

module, 1300 to 1620 nm

Select exactly one reference receiver option:

86116C-025: 40 GHz opt./80 GHz elec. channels,

17.0/25.8/27.7 Gb/s reference receiver

86116C-041: 65 GHz opt./80 GHz elec. channels,

39.81/41.25/43.02 Gb/s reference receiver

Dual/Quad electrical channel modules

86112A Dual 20 GHz electrical channels

86112A-HBW Dual 30 GHz electrical channels

86117A Dual 50 GHz electrical channels

86118A Dual 70 GHz electrical remote sampling channels

86118A-H01 Differential De-Skew

N1045A

2/4 Port 60 GHz electrical remote head

N1045A-02F 2 channel remote head, 1.85 mm, female

N1045A-02M 2 channel remote head, 1.85 mm, male

N1045A-04F 4 channel remote head, 1.85 mm, female

N1045A-04M 4 channel remote head, 1.85 mm, male

TDR/TDT modules

1. Fixed node customer installed or transportable customer installed (86100DU or 86100DT). Not available as a factory-installed license.

2. This module is not compatible with the 86100A and 86100B DCA mainframes. If you want to upgrade older DCAs, contact Agilent Technologies to discuss current trade-in deals

3. System impulse response correction calibration provides a unique calibration file for the optical channel(s). The FlexDCA user interface uses this calibration file to create ideal reference

receiver responses for more accurate and consistent transceiver compliance testing. IRC also allows reference receivers to be defined at any data rate within +/- 50% of the hardware

response. This allows optical receivers to significantly extend their operating range.

4. A 15 Gb/s filter is provided with Option 281 and 282 that closely approximates the response required for 16X Fibre Channel compliance testing. Contact Agilent for a special option that

verifies compliance of the 86105D-281 and 86115D-282 to the 16X Fibre Channel reference receiver specification.

54754A

1,5

Differential TDR module with dual 18 GHz

TDR/electrical channels

N1055A

35/50 GHz, 2/4 port, TDR/TDT remote head

N1055A-32F 35 GHz, 2 channel remote head, 2.92 mm, female

N1055A-32M 35 GHz, 2 channel remote head, 2.92 mm, male

N1055A-34F 35 GHz, 4 channel remote head, 2.92 mm, female

N1055A-34M 35 GHz, 4 channel remote head, 2.92 mm, male

N1055A-52F 50 GHz, 2 channel remote head, 1.85 mm, female

N1055A-52M 50 GHz, 2 channel remote head, 1.85 mm, male

N1055A-54F 50 GHz, 4 channel remote head, 1.85 mm, female

N1055A-54M 50 GHz, 4 channel remote head, 1.85 mm, male

Precision timebase module

86107A Precision timebase reference module

86107A-010 2.5 and 10 GHz clock input capability

86107A-020 10 and 20 GHz clock input capability

86107A-040 10, 20 and 40 GHz clock input capability

Clock recovery modules

The following modules provide a recovered clock from the data

signal for triggering at indicated data rates:

83496B 50 Mb/s to 7.1 Gb/s Clock recovery module. This

module is not compatible with the 86100A and

86100B DCA mainframes. If you want to upgrade

older DCAs, contact Agilent Technologies and ask

for current trade-in deals.

83496B-100 Single-ended and differential electrical with

integrated signal taps

83496B-101 Single Mode (1260-1360 nm and

1490-1600 nm) and multimode (830-860 nm and

1260-1360 nm) optical. Integrated signal

taps. Single-ended or differential electrical inputs

(no signal taps)

83496B-200 Increase operating range to 50 Mb/s to 14.2 Gb/s

83496BU-200 Data rate 0.05 Gb/s to 14.2 Gb/s upgrade

83496B-201 Shift operating range to 7.1 to 14.2 Gb/s

83496BU-201 Shift operating range to 7.1 to 14.2 Gb/s upgrade

83496B-300 Add tunable loop bandwidth “golden PLL” capabil-

ity

83496BU-300 Adjustable loop bandwidth upgrade

External clock recovery solutions

1 2 ... 26 27 28 29 30 31 32 33 34 35 36

Commenti su questo manuale

Nessun commento

Agilent Technologies 86100D Manuale Utente Pagina 31

Commenti su questo manuale

Prodotti e manuali riguardandi Misurazione, test & controllo Agilent Technologies 86100D