Agilent Technologies InfiniiVision 3000 DSO-X 3054A Manuale di Servizio Scaricare il pdf (Pagina 658)

100

101

658 Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide

28 :TRIGger Commands

:TRIGger[:EDGE]:LEVel

(see page 860)

Command Syntax

:TRIGger[:EDGE]:LEVel <level>

<level> ::= <level>[,<source>]

<level> ::= 0.75 x full-scale voltage from center screen in NR3 format

for internal triggers

<level> ::= ±(external range setting) in NR3 format

for external triggers

<level> ::= ±8 V for digital channels (MSO models)

<source> ::= {CHANnel<n> | EXTernal} for the DSO models

<source> ::= {CHANnel<n> | DIGital<d> | EXTernal}

for the MSO models

<n> ::= 1 to (# analog channels) in NR1 format

<d> ::= 0 to (# digital channels - 1) in NR1 format

The :TRIGger[:EDGE]:LEVel command sets the trigger level voltage for the

active trigger source.

Query Syntax

:TRIGger[:EDGE]:LEVel? [<source>]

The :TRIGger[:EDGE]:LEVel? query returns the trigger level of the current

trigger source.

Return Format

See Also • "Introduction to :TRIGger Commands" on page 641

• ":TRIGger[:EDGE]:SOURce" on page 661

• ":EXTernal:RANGe" on page 266

• ":POD<n>:THReshold" on page 423

• ":DIGital<d>:THReshold" on page 253

NOTE

If the optional source is specified and is not the active source, the level on the active source

is not affected and the active source is not changed.

1 2 ... 653 654 655 656 657 658 659 660 661 662 663 ... 969 970

Commenti su questo manuale

Nessun commento

Agilent Technologies InfiniiVision 3000 DSO-X 3054A Manuale di Servizio Pagina 658

Commenti su questo manuale

Prodotti e manuali riguardandi Misurazione, test & controllo Agilent Technologies InfiniiVision 3000 DSO-X 3054A