Agilent Technologies 54502A Manuale di Servizio Scaricare il pdf (Pagina 26)

3. Reinsert the fuse module with the arrows aligned for your application. See

fuse module below.

4. Reconnect the power cord, turn the rear power switch to the ON position,

and continue normal operation.

Power Cable This instrument is equipped with a three-wire power cable. When connected to an

appropriate AC power outlet, this cable grounds the instrument cabinet. The type

of power cable plug shipped with the instrument depends on the country of

destination. See Table 2-1 for the option numbers of available power cables and

plug configurations.

Operating Disk

Installation

This instrument is shipped with a yellow protective disk in the disk drive. Before

applying power to the instrument, remove the protective disk from the disk drive

and install the operating disk. Reinstall the protective disk whenever the

instrument is to transported.

Applying Power When power is applied to the HP 1650B/51B, a power-up self test is automatically

performed. For information on the power-up self test, refer to section 3.

Figure 2-2. Fuse Module

HP 1650B/1651B Installation

Service Manual 2-3

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 110 111

Nessun commento

Agilent Technologies 54502A Manuale di Servizio Pagina 26