Agilent Technologies 54502A Manuale di Servizio Scaricare il pdf (Pagina 33)

Original

Packaging

If the original packaging material is unavailable or unserviceable, materials

identical to those used in factory packaging are available through Hewlett-Packard

offices. If the instrument is to be shipped to a Hewlett-packard office for service,

attach a tag identifying the owner, address of the owner, complete instrument

model and serial numbers, and a description of the service required. Mark the

container FRAGILE to ensure careful handling. In any correspondence, refer to

the instrument by model number and full serial number.

Other

Packaging

The following general instructions should be followed for repacking the instrument

with commercially available materials.

Remove discs from disk drives and install yellow shipping discs.

Wrap the instrument in heavy paper or plastic.

Use a strong shipping container. A double-wall carton made of 350 lb. test

material is adequate.

Use a layer of shock-absorbing material 70 to 100 mm (3 to 4 inches) thick

around all sides of the instrument to provide firm cushioning and prevent

movement inside the container. Protect the control panel with cardboard.

Seal the shipping container securely.

Mark the shipping container FRAGILE to ensure careful handling.

In any correspondence, refer to the instrument by model number and serial

number.

Cleaning

Requirements

Use MILD SOAP AND WATER to clean the H P 1650B/51B cabinet and front

panel. Care must be taken to not use a harsh soap which may damage the

water-base paint finish of the instrument.

Installation HP 1650B/1651B

2-10 Service Manual

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 110 111

Nessun commento

Agilent Technologies 54502A Manuale di Servizio Pagina 33