Agilent Technologies B2902 Manuale di Servizio Scaricare il pdf (Pagina 125)

Agilent B2900 SCPI Command Reference, Edition 2 4- 3

Subsystem Commands

:CALCulate:CLIMits:CLEar:AUTO

CALCulate Subsystem

For the numeric suffixes [c], [m], and [n], see “Numeric Suffix” on page 1-8.

:CALCulate:CLIMits:CLEar:AUTO

Enables or disables the automatic clear function of the composite limit test.

Syntax :CALCulate[c]:CLIMits:CLEar:AUTO mode

:CALCulate[c]:CLIMits:CLEar:AUTO?

Parameter mode 0|OFF|1|ON (default). Parameter data type is boolean.

mode=1 or ON enables the automatic clear function which clears the composite

limit test results and ports (GPIO lines) automatically with each :INITiate

command. See

“:INITiate[:IMMediate]<:ACQuire|:TRANsient|[:ALL]>” on page

4-157.

mode=0 or OFF disables the automatic clear function. The composite limit test

results and ports (GPIO lines) must be cleared manually before the next composite

limit test is started. Execute the

:CALCulate:CLIMits:CLEar[:IMMediate]

command to clear them immediately.

Query response mode <newline>

mode is 0 or 1, and indicates that the automatic clear function is off or on,

respectively. Response data type is NR1.

Example :CALC:CLIM:CLE:AUTO 1

:CALC2:CLIM:CLE:AUTO?

:CALCulate:CLIMits:CLEar:AUTO:DELay

Sets the delay time for the automatic clear of the composite limit test. See

“:CALCulate:CLIMits:CLEar:AUTO” on page 4-3. The delay time is defined as the

time before the automatic clear is performed after the measurement is completed.

Syntax :CALCulate[c]:CLIMits:CLEar:AUTO:DELay time

:CALCulate[c]:CLIMits:CLEar:AUTO:DELay? [time]

1 2 ... 120 121 122 123 124 125 126 127 128 129 130 ... 325 326

Nessun commento

Agilent Technologies B2902 Manuale di Servizio Pagina 125