Agilent Technologies B2902 Manuale di Servizio Scaricare il pdf (Pagina 126)

4- 4 Agilent B2900 SCPI Command Reference, Edition 2

Subsystem Commands

:CALCulate:CLIMits:CLEar[:IMMediate]

Parameter time value (+1E-5 to 60 seconds)|MINimum|MAXimum|DEFault

(default is +1E-4). Parameter data type is NRf+. Query does

not support time=value. If you specify the value less than MIN

or greater than MAX, time is automatically set to MIN or MAX.

Query response time <newline>

time returns the present setting of delay time for the automatic clear. If a parameter

is specified, time returns the value assigned to DEF, MIN, or MAX. Response data

type is NR3.

Example :CALC:CLIM:CLE:AUTO:DEL 1E-3

:CALC2:CLIM:CLE:AUTO:DEL?

:CALCulate:CLIMits:CLEar[:IMMediate]

Clears the composite limit test results and ports (GPIO lines) immediately.

Syntax :CALCulate[c]:CLIMits:CLEar[:IMMediate]

Example :CALC:CLIM:CLE:IMM

:CALC2:CLIM:CLE

:CALCulate:CLIMits:<FAIL|PASS>:DIGital[:DATA]

Defines a fail/pass pattern that appears near the end of the flowcharts shown in

Figures

2-10 and 2-11. This is a bit pattern used to indicate the composite limit test

result (fail or pass). It must be entered in the format set by the :FORMat:DIGital

command.

Syntax :CALCulate[c]:CLIMits:<FAIL|PASS>:DIGital[:DATA] bit_pattern

:CALCulate[c]:CLIMits:<FAIL|PASS>:DIGital[:DATA]?

For <FAIL|PASS>, specify PASS for a pass pattern or FAIL for a fail pattern.

Parameter bit_pattern 0 (default setting in decimal expression) to 16383. Parameter

data type is NR1 or NDN.

Query response bit_pattern <newline>

bit_pattern returns the fail/pass bit pattern in the format specified by the

:FORMat:DIGital command. Response data type is NR1 or NDN.

1 2 ... 121 122 123 124 125 126 127 128 129 130 131 ... 325 326

Nessun commento

Agilent Technologies B2902 Manuale di Servizio Pagina 126