Agilent Technologies B2902 Manuale di Servizio Scaricare il pdf (Pagina 210)

4- 88 Agilent B2900 SCPI Command Reference, Edition 2

Subsystem Commands

:SENSe:TOUTput:SIGNal

mode=1 or ON enables offset-compensated resistance measurement.

Query response mode <newline>

mode is 0 or 1, and indicates that offset-compensated resistance measurement is off

or on, respectively. Response data type is NR1.

Example :SENS:RES:OCOM 1

:SENS2:RES:OCOM?

:SENSe:TOUTput:SIGNal

Selects the trigger output for the status change between the trigger layer and the

acquire device action. Multiple trigger output ports can be set.

Syntax :SENSe[c]:TOUTput:SIGNal output{,output}

:SENSe[c]:TOUTput:SIGNal?

Parameter output Trigger output port.

EXT1

(default)

|EXT2|EXT3|EXT4|EXT5|

EXT6|EXT7|EXT8|EXT9|EXT10|EXT11|EXT12|EXT13|EXT14|

LAN|INT1|INT2

. Parameter data type is CPD.

output=INT1 or INT2 selects the internal bus 1 or 2, respectively.

output=LAN selects a LAN port.

output=EXTn selects the GPIO pin n, which is an output port of the Digital I/O

D-sub connector on the rear panel. n=1 to 14.

Query response response <newline>

response returns the present setting, INT1, INT2, LAN, or EXT1 through EXT14.

Response data type is CRD. Multiple responses are separated by a comma.

Example :SENS:TOUT:SIGN EXT3

:SENS2:TOUT:SIGN?

:SENSe:TOUTput[:STATe]

Enables or disables the trigger output for the status change between the trigger layer

and the acquire device action.

Syntax :SENSe[c]:TOUTput[:STATe] mode

1 2 ... 205 206 207 208 209 210 211 212 213 214 215 ... 325 326

Nessun commento

Agilent Technologies B2902 Manuale di Servizio Pagina 210