Agilent Technologies B2902 Manuale di Servizio Scaricare il pdf (Pagina 282)

4- 160 Agilent B2900 SCPI Command Reference, Edition 2

Subsystem Commands

:TRIGger<:ACQuire|:TRANsient|[:ALL]>:SOURce[:SIGNal]

:TRIGger[c]<:ACQuire|:TRANsient>:SOURce:LAN?

For <:ACQuire|:TRANsient|[:ALL]> and <:ACQuire|:TRANsient>, specify

:ACQuire for measurement, :TRANsient for source output, or :ALL for both device

actions.

Parameter lan_id LAN ID of the LXI trigger. LAN0|LAN1|LAN2|LAN3|LAN4|

LAN5|LAN6|LAN7. All is selected as default. Parameter data

type is CPD.

Query response response <newline>

response returns the present setting, LAN0 through LAN7. Response data type is

CRD. Multiple responses are separated by a comma.

Example :TRIG:SOUR:LAN LAN7

:TRIG2:TRAN:SOUR:LAN?

:TRIGger<:ACQuire|:TRANsient|[:ALL]>:SOURce[:SI

GNal]

Selects the trigger source for the specified device action.

Syntax :TRIGger[c]<:ACQuire|:TRANsient|[:ALL]>:SOURce[:SIGNal] source

:TRIGger[c]<:ACQuire|:TRANsient>:SOURce[:SIGNal]?

For <:ACQuire|:TRANsient|[:ALL]> and <:ACQuire|:TRANsient>, specify

:ACQuire for measurement, :TRANsient for source output, or :ALL for both device

actions.

Parameter source Trigger source.

AINT

(default)

|BUS|TIMer|INT1|INT2|

LAN|EXT1|EXT2|EXT3|EXT4|EXT5|EXT6|EXT7|EXT8|EXT9|

EXT10|EXT11|EXT12|EXT13|EXT14

. Parameter data type is

CPD.

source=AINT (automatic internal) automatically selects the trigger source most

suitable for the present operating mode by using internal algorithms.

source=BUS selects the remote interface trigger command such as the group

execute trigger (GET) and the

*TRG command.

source=TIMer selects a signal internally generated every interval set by the

:TRIGger<:ACQuire|:TRANsient|[:ALL]>:TIMer command.

1 2 ... 277 278 279 280 281 282 283 284 285 286 287 ... 325 326

Nessun commento

Agilent Technologies B2902 Manuale di Servizio Pagina 282